Solar Panel Installation Guide: 8 Steps To Follow

A solar panel is a great option for all homes and offices. The solar panel provides more relaxation and comfort by getting energy from the sun and utilizing this energy in home appliances without any cost. So, if you decide to install solar panels for your homes or offices, then you should need to learn how to install them. You can install the solar panel by following the Solar Panel Installation Guide which will explain in the article below.

Before start installing process, it is important to check the adequate place where you want to install the solar panels so that this panel easily fits in your desired place. After that, you can go for the solar panel. Here, we will give you a complete guide to install them easily. There are various steps to install solar panels. So, let’s discuss.

Steps to install the solar panel

1. Safety protection

When you’re going to install the solar panel on your home’s roof, first examine that you have all the necessary materials that are important for installation purposes. Apart from this, you should wear protective equipment to reduce the risks such as wearing glasses, gloves and wearing full sleeves. You should use the roof anchor. Also, you should make sure about the weather condition first.

Then you make sure that all the electrical wires are dismissed completely. Use the conductor to check that there is no voltage existing. After this, start installing process.

2. Direction for installing the solar panel

You should confirm the direction of your solar panel so that they catch the maximum light from the sun. Because their performance depends on the direction in which they are located. Typically, the south direction gives the highest performance and the East/west gives a moderate performance. You should avoid placing them in the north place.

3. Assemble solar panels

After fitting the solar structure correctly, now attach the solar modules to it. Make sure that nuts and screws properly fit with the solar structure. So that the solar panels wouldn’t fall and lasts for a longer time.

4. Electrical wiring

Some Solar units have wire leads that contain MC4 connectors and embedded junction-box on the back side of the wires scrawl out. If you are connecting your solar panels in series, then you need to join the positive wires of one module to the negative wire of the other module.

Hence, the series connection enhanced the voltage. If you are connecting your solar panel in parallel assembly, then you will link the positive lead of one panel to the positive lead of another panel and the negative to the negative lead. This parallel connection retains the voltage of the panels.

5. The connection between a solar panel and a solar inverter

For connecting the solar panel to the solar inverter, you will have to attach the positive wire of the solar panel with the plus pole of the inverter. The negative wire of the solar panel attaches to the negative pole of the inverter. You also require connecting the battery and output wire with the inverter. The output of the series connection joins with the input of the inverter. Before assembling, confirm that the inverter is switched off.

6. The connection between the solar inverter and solar battery

The battery is the main component of the solar system because it stores energy. You need to connect this battery to the solar inverter for recharging. For this assembly, you will have to connect the plus pole of the battery with the positive and the minus pole of the battery with the negative of the inverter.

7. The connection between the solar inverter and the grid

To connect the solar inverter to the grid, you simply need to plug it into the power board. Hence, it will acquire power from the grid. The output cable is already connected to the main switchboard which is the source of delivering electrical energy in the home. It is necessary to mount the metering device to analyze the excess produced power from the solar structure.

To install it, you will have to join the positive cable of the metering device with the line terminal of the inverter and the negative cable with the neutral terminal.

8. Start solar inverter through solar panel or grid

You should make sure that all the connections are properly finished. Then start the solar inverter by switching on the main power button. The solar inverter has a digital screen that presents all the information about the volts and current produced by the solar panel throughout the day. You’ll easily check the total consumed energy from the solar system.

Solar Panel Maintenance:

Solar panels do not require any cost-effective or extra regular maintenance. They need little care to maintain them for longer use. You just need to clean them from dirt or dust which are blocking the direct sunlight. You can only clean them per year or as you want. It is because your solar panels should be clean for absorbing the maximum light from the sun.

For cleaning the solar panels by yourself, you can wash the solar panel with normal water. Don’t wash them with cold water when the solar panels are hot because this will destroy them. Keep in the mind; always clean your solar panel in the morning or evening.

Apart from this, if your solar panels do not get cleaned with water then you can clean them with soap water by using a clean cloth and sponge. You can also consult with a cleaning company if they are not cleaned by yourself. Moreover, you should test your solar panels each four to six years with a solar panel installer to maintain their quality and performance.

FAQs:

What is the best angle to install solar panels?

The best angle to install solar panels on your roof is 30 degrees to 45 degrees. This is a perfect angle for getting the maximum light from direct sunlight. Solar panels in this particular angle give maximum output for the whole year.

What do I need to know before I install solar?

Before installing your solar panel, you must make sure that your roof is smooth. You should know about the form of the roof. You should also check the direction of the slope if your roof has a sloppy face. It is important to confirm that your roof can bear the weight of the solar panels. Apart from this, you should know about connecting solar panels with the grid.

How many solar panels does it take to run a house?

Typically, 20 to 24 solar panels are enough to run a house. Installing the number of solar panels depends on your house's location and the specification of every solar panel. If you have 10 Marla houses, then it will consume 1300 units in a month. So, 10kW of the solar system is the perfect choice for this size of house.

 

Conclusion:

Solar panels are the best way to reduce your electricity bill and save money. So, if you are looking for how to install solar panels, different things you must keep in your mind. First, select desired high-quality solar panel according to your need. Second, follow Solar Panel Installation Guide carefully, as I have mentioned in my article. Third, check your solar panel and clean them to maintain their efficiency.

Leave a Comment